
Gap filling epoxy paste adhesive for civil engineering use.
Megapoxy PM is specially formulated structural non-sag epoxy filling paste and adhesive. This easy to use two-part epoxy sets after mixing to an extremely durable adhesive ideal for bonding natural stone, concrete, steel, timber, glass and masonary. It is easy to use 1:1 mixing make it suitable for onsite applications.
Uses:
- Precast concrete articles
- Concrete Pipes and Tanks
- Grouting bolts
- Fibreglass articles
- Natural stones
- Concrete floors and stairs
- Bricks and ceramics
- Concrete columns
- Metals
- In-situ formed concrete
Surface Preparation:
Metals: Should be grit blasted to clean surface. Mechanically abraded and degreased. Wire brushing is not entirely satisfactory and gives minimal adhesion only.
Painted Surfaces: A proprietary brand paint stripper should be used. Concrete - the surface may be either flame cleaned or mechanically abraded.
Processing Data:
Mixing Ratio:1 part resin to 1 part hardener by volume
Mixing: Mix until uniform grey or white
Working Life at 25°C: 45 minutes
Minimum Application temperature: 10°C
Minimum Cure Time: 12 hours at 25°C
Full Cure Time: 4 days at 25°C
Choose a video source (YouTube/Vimeo, Iframe, or MP4) in this block’s settings.