Megapoxy PF

Rapid Set Paste adhesive for civil engineering applications. Megapoxy PF is a rapid set epoxy adhesive which sets in seven minutes and attains more than half its ultimate strength within 15 minutes of mixing. Megapoxy PF “hardens-as-you-hold-it” for immediate on the spot emergency repairs to tanks, pipes, machinery, concrete structures etc.

Features:

• Smooth and easily workable
• Simple 1:1 mixing ratio
• Non-sag on vertical or overhead surface
• Sets in 3 minutes at 25*C - 90% cure within 1 hour at 25*C
• Very high strength permanent bonds
• Tensile and compressive strength superior to concrete
• Excellent chemical resistance
• Can be machined after 30 minutes cure at 25*

Typical Cured Properties: 

• Tensile strength
• Tensile shear strength
• Flexural strength
• Compressive strength 25 MPa 10 MPa 18 MPa 65 MPa
• Coefficient of linear expansion( mm/mm/ºC x l0~6 )
• Water absorption - ASTM D570 - 10 days at 25º
• Dielectric strength 50 HZ at 25º C ( Kv/cm ) 40 0.5% 190

Choose a video source (YouTube/Vimeo, Iframe, or MP4) in this block’s settings.